Cookworks CM8500A-GS, Care & Instruction Manual

Page: 7 / 17

Draft 2 22/07/2021 7
PREPARATION FOR USE
Before using the espresso machine for the first time.
It is important to thoroughly clean the appliance before first
use.
1.
The espresso machine comes fully assembled but without
the filter and the holder fitted.
2. Place the espresso machine on a stable, flat, heat resistant
surface and away from surfaces that may be damaged by
steam.
3. Remove all tape used for product transit.
4. Slide out the water tank and fill with water. Do not fill past
the ‘max’ mark on the tank. Insert the water tube and then
refit the water tank.
5. Fit the filter into the filter holder
6. Offer the filter holder to the brewing head and align the
handle with ‘ insert ’ marked at the side of the appliance
(fig. 6).
7. Move the handle firmly to the right (fig 7) until it is aligned
with the position marked
‘lock’ on the front face (fig. 8).
Fig. 6 Fig. 7 Fig. 8
8. Place a jug or similar onto the cup shelf directly
underneath the brewing nozzles of the filter holder.
9. Ensure that the steam knob is aligned with the off ‘ ’
position.
10. Check that all buttons are in their raised (off) position.
11. Fully unwind the cable, plug in and switch on. For safety
do not allow the cable to dangle over the edge of units.