Issue 2 26/11/2019
6
Notes:
Before using for the first time, fill the coffee maker to the
maximum level with clean water, close the lid and allow the
coffee maker to work. Do not use the mesh filter and discard
the hot water after it is finished. Wash the loose parts (mesh
filter, filter holder, glass jug and jug lid) in hot water with a
little washing up liquid. Rinse and dry thoroughly. Not
suitable for the dishwasher.
For best results always use fresh cold water in the coffee
maker and freshly ground beans. Serve coffee immediately
after brewing.
After 40 minutes the coffee maker will automatically enter
standby mode and the coffee will no longer be kept warm.
SETTING THE CLOCK
1.
Plug in and switch on the coffee maker. The time digits will
flash in the display. Press the SET or ON/OFF button to stop
the digits flashing.
2.
Press the SET button and the ‘clock’ indicator will flash.
3.
Press the HOUR button until the correct hour is displayed.
4.
Press the MIN button until the correct minute is displayed
5.
The set time will save automatically a few seconds after the
last press of a button and ‘clock’ indicator will stop flashing.
PROGRAMMING THE COFFEE MAKER
The coffee maker can be programmed to start to operate at a
set time and also to switch off after a set time. For example the
coffee maker can be set so that you wake up to a freshly brewed
cup of coffee in the morning and to switch off before you leave
the house for work.
Summary of Contents for CM2069ST
Page 12: ...Issue 2 26 11 2019 12...
