Issue 2 05/08/2021
5
TO USE
1.
Dismantle and clean thoroughly before first use
–
see
cleaning section.
2.
Place the motor housing on a stable, flat surface.
3.
Fill the desired quantity of coffee beans or spices into the
grinding bowl. Do not fill past the maximum line marked.
4.
Fit the grinding bowl onto the motor housing. Align the
grooves in the collar of the grinding bowl with the lugs in the
top of the motor housing and turn clockwise firmly in the
direction of the ‘locked’ padlock symbol marked on the rim
of the motor housing.
5.
Fit the transparent cover onto the motor housing.
6.
Fully unwind the coffee grinder cable and plug in.
7.
Press down on the ON / OFF button to start the grinder.
Grind for a maximum of 30 seconds.
8.
To switch off, release the button and allow the blade to come
to a complete stop before checking the fineness of the grind.
If satisfactory, remove the cover and bowl from the motor
housing.
9.
If further grinding is required, wait a few seconds before
restarting.
10.
After using the grinder for 2 x 30 second cycles, a short
rest interval (e.g. 3 minutes) is required before using the
grinder again.
11.
To stop or interrupt the grinding process, release the ON
/ OFF button or turn off at the mains.
Note:
•
Do not run the grinder empty / without the blades covered.
Summary of Contents for CG9100
Page 9: ...Issue 2 05 08 2021 9 ...
