Cookworks 9375633 Care & Instruction Manual Download Page 11 | Manualshive

Page: 11 / 12

Cookworks 9375633 Care & Instruction Manual Download Page 11

`

Issue 2 27/08/2021

11

PLUG / WIRING ADVICE
The wires in this mains lead are coloured in accordance with the
following UK electrical code:

BLUE = NEUTRAL
BROWN = LIVE

Non-rewireable plug
This appliance may be fitted with a

“non

‐

rewireable” plug. If you

need to change the fuse in a “non

‐

rewireable” plug, the fuse

cover must be refitted.  If the fuse cover is lost or damaged, the
appliance must not be used.

Rewireable plug
The colours of the wires in the mains lead of this appliance may
not  correspond  with  the  coloured  markings  identifying  the
terminals in a rewireable plug.  Rewireable plugs should only be
replaced by a suitably competent person.  If in doubt, consult a
qualified electrician.

The BLUE wire must be connected
to the terminal marked with the
letter N

The  BROWN  wire  must  be
connected  to the terminal marked
with the letter L

Produced in China.

Argos Limited, 489-499 Avebury Boulevard, Milton
Keynes, MK9 2NW.

Argos (N.I.) Ltd, Forestside Shopping Centre, Upper
Galwally, Belfast, United Kingdom, BT8 6FX.

Argos Distributors (Ireland) Limited, Unit 7,
Ashbourne Retail Park, Ballybin Road, Ashbourne,
County Meath, Ireland

www.argos.co.uk/cookworks
Tel: 0345 640 3030

«
...
9
10
11
12
»

Summary of Contents for 9375633













Reviews:

No comments