7
Using the “Booster” Function
With the unit powered on and already on a power level or temperature, press the
Booster
button to
activate the “Booster” function. This function sets the unit at maximum power for a duration of 20
seconds before resuming to the previously set power level or temperature. To turn off the “Booster”
function before it automatically deactivates, press the
Booster
button again.
Troubleshooting
The following chart lists the error codes that the CookStar Induction Pro may display. Consult this
chart in order to determine which action to take to correct the problem.
Error Code
Reason
Solution
--- ----
Waiting status
Place a suitable pot/pan onto
the induction cooking field. The
cooktop will work as normal
E0
Induction does not work
Please return the cooktop for
repair
E1
Use of non-induction
compatible pot or too small a
pot
Use an induction compatible pot
of the correct size
E2
Overheat protection
Allow the cooktop to cool down,
turn it off completely and then on
again
E3, E4
Voltage too low, too high
Connect the cooktop to a correct
power outlet
E5
Open circuit
Please return the cooktop for
repair
E6
Ceramic plate is overheated
Allow the cooktop to cool down,
turn it off completely and then on
again
NOTE:
When “E2” or “E6” appears in the display this indicates that the overheat protection was
activated to protect the cooktop and cooking pots. An activated overheat protection can be
reset by unplugging the power cord or allowing the unit to cool completely. The cooktop
can then be used in the normal way
.
