11
PREPARING YOUR PRESSURE COOKER
(CONT).
4)
Closing the Lid:
Make sure the Rubber Seal Ring (11) is fitted properly onto the inner part
of the lid (1). Observe the Rubber Seal Ring (11) inside the Lid (1) and
ensure that it is evenly fitted onto the track. (Caution: If the rubber
seal ring is damaged, do not use the pressure cooker. Contact
Customer Service to repair or replace.)
5)
Lift the lid (1) from the rested position. Close the lid (1). Hold the
handle (2) and turn it Counter-Clockwise to the
“
LOCKED
”
position. (A
clamping sound can be heard See Figures 14-16).
Note: To ensure you are properly closing the lid (1), please make sure the
pressure limiting valve (3) is on your left side when you are facing the front
of the pressure cooker (when facing the control panel (7).
6)
Adjust the pressure limiting valve (3) to the
“
Airtight
”
position, and
ensure that the Float Valve (4) sinks (Figures 17-18).
7)
When adjusting the pressure limiting valve (3) to either the
"
Airtight
"
or the
"
Exhaust
"
positions, line up the marking on the pressure limiting
valve (3) with the notch on the Handle (2) as shown in figure 19.
14
15
16
17
18
19
CLOSE
CLOSE
CLOSE