6
5. Refit the
Chopper Lid
. Align with the marks and then rotate clockwise to lock.
6. Place the assembled
Chopper Bowl
on a flat, level and stain resistant surface.
7. Attach the Blender Body into the top of the Chopper Bowl and twist clockwise to lock.
WARNING:
Maximum operating time cannot exceed 30 seconds and 3 minutes rest
time. This can be repeated a second time.
8. To operate your
Cordless Blender
, proceed as follows:
9. To
Switch ON
the
Cordless Blender
, press the
Safety Interlock Button
(3) and
then
Power ON/OFF Button
(4). Once the
Blender
is operating you can release the
Safety Interlock Button
. (If you release the Power
ON/OFF Button
then you will
need to repeat the two-button process again). When operating the Indicator (1) shows
BLUE
. If your battery becomes low then it changes to
RED
.
NOTE
: Pulsing
ON – OFF
often achieves the best results.
10. When you have finished using your
Blender
remove the
Body
from the
Chopper
Bowl
by twisting it Anti-clockwise.
WARNING: DO NOT
remove the lid from the
Chopper Bowl
with the
Blender
still
attached.
Safety hazard
.
11. Disassemble and clean, see the
Cleaning Section
for guidance.
SAFETY INTERLOCK BUTTON (3)
POWER ON/OFF BUTTON (4)
