14
In
more
detail...
MRD60/70/90CL Cooker Hood
GB
IE
Troubleshooting
Troubleshooting
Fault
Cause
Solution
Excessive
vibration.
The appliance is not
installed properly on the
brackets.
Take down the appliance and
check it is properly fixed.
The fan blade is
damaged.
Switch off the appliance. Repair
to be carried out by qualified
service personnel only.
The fan motor is not fixed
tightly.
Light on, but
motor does not
work.
The fan blade is jammed.
The motor is damaged.
Both light and
motor do not
work.
Light bulb blown.
Replace with a bulb with correct
rating.
Power connection loose.
Check power supply.
Suction
performance
reduced.
Speed may be too low.
Select a higher speed.
Distance between the
cooker hood and the hob
is too great.
Readjust the distance to:
Gas hobs: 750mm
Electric hobs: 650mm
Aluminium grease filter is
dirty.
Clean filters. See
Care and
maintenance
section.
Top vent might be
obstructed.
Clear any obstruction.
Optional vent kit might be
twisted.
Ensure that the vent kit is fitted to
the manufacturers instructions.
Works normally
but cooking
smells linger.
Charcoal filter not fitted
in recirculation mode or
charcoal filter is full of
grease.
Fit charcoal filter if recirculating or
change the filter. See
Care and
maintenance
section.
MRD60_70_90CL-C&L-A5 GB-IM-04.indd 14
8/2/13 11:13 AM
