ASSEMBLY GUIDE
CSS 1618
07/15
STANDARD & TALL DRESSER WALL CABINETS
JOINING & LEVELLING
Mark 20mm on a 3mm dia. drill bit with masking
tape. Drill between the 2 holes drilled for the hinges,
through one cabinet side into the next, stopping when
you reach the marker.
Join the cabinets together with 2 x screws.
SMALL DRAWER FITTING
For fitting of drawers, refer to the assembly guide
within the drawer pack.
F
NOTES:
Push shelf support into
chosen shelf position holes,
4 per shelf.
Tilt and slide in shelf.
SHELF FITTING
J
3mm
90°
F
Fit panel to panels and , and tighten cams.
STEP 3:
2
2
3
3
3
4
4
1
FIXING TO WALL
Position and secure fitting brackets to the wall with
suitable fixings.
P
Spacing between side panels
allow 20mm clearance each side
Measure
62mm
from
top of unit
Adjustment - IN & OUT to Wall
Adjustment - UP & DOWN
P
P
WARNING: There is a danger of this cabinet
falling off the wall if incorrectly fitted.
(Fixings are not supplied with the pack as they vary
according to the type of walls you have. If you are
unsure, ask an expert).
Hang the cabinet onto the wall brackets , ensuring
that the hooks are fully engaged behind the brackets,
as shown. (Pulling the fitted cabinet towards yourself,
whilst supporting its weight, will confirm this has
been achieved).
UP & DOWN
IN & OUT to Wall
P
M
Ensure the front face of the unit is vertical by using a
spirit level.
P
P
M
