9
In
more
detail...
BFZ60CL Built under freezer
GB
IE
Operation
Product functions
Before switching on
•
Make sure that it has been installed by a suitably qualified person, as per
the information contained in installation instructions.
•
After delivery, wait for eight hours before connecting the appliance to your
mains supply. This will allow any refrigerant gasses that may have been
disturbed during the transportation process to settle.
•
The outside of the appliance and the removable accessories contained
within it, should be cleaned with a solution of liquid detergent and water.
•
The interior of the appliance should be cleaned with a solution of sodium
bicarbonate dissolved in lukewarm water. The interior and accessories
should be thoroughly dried, after the cleaning process has been completed.
•
There can be an odour when you first switch on the appliance. It will lessen
as the appliance starts to cool.
Before first use
•
You should set the thermostat dial to its maximum setting for 24 hours after
switching on the appliance for the first time.
•
When you first switch on the appliance, the compressor will run
continuously until the freezer reaches a cool enough temperature.
•
During this period of time, you should try not to open the door frequently or
place a large amount of food within the appliance.
•
You should then adjust the thermostat dial down to its normal operating
position.
•
If the unit is switched off or unplugged, you must allow at least 5 minutes
before restarting the appliance..
Switching on the appliance and setting the thermostat
1
2
3
4
0
You switch on your appliance by connecting it to your mains supply and
setting the thermostat. The thermostat control knob is located at the top of the
appliance.
BFZ60CL-C&L-A5-GB-IM-12.indd 9
10/8/13 2:20 PM