34
In
more
detail...
GB
IE
Troubleshooting
Troubleshooting
Fault
Cause
Solution
Glasses
have a dull
appearance.
Amount of rinse-aid set
too low.
Alter the amount of rinse-aid.
Tea stains or
traces of lipstick
have not been
completely
removed.
Detergent has insufficient
bleaching effect.
Use a more powerful detergent.
Washing temperature set
too low.
Set to a high temperature.
Traces of rust
on cutlery.
Cutlery not sufficiently
rustproof.
Buy dishwasher safe cutlery.
Salt container cap not
screwed tight.
Secure the cap tightly.
Too much salt spilled
while filling container.
Take care when filling the
container.
Smears left on
glasses and
cutlery; glasses
have acquired
a metallic
appearance.
Amount of rinse-aid set
too high.
Adjust the rinse-aid to a lower
setting.
Cover in
detergent
compartment
cannot be
closed.
Detergent compartment
has been overfilled.
Empty, clean and refill.
Mechanism is clogged
with remnants of
detergent.
Clean compartment.
Remnants
of detergent
stuck inside
dispenser.
Compartment was damp
when filled up with
detergent. Dry it before
adding detergent.
Clean, dry and refill.
Water remains
inside appliance
after program
has ended.
Blockage or kink in
drainage hose.
Check drain hose for blockage
and re-position if needed.
Filters are blocked.
Refer to care and maintenance.
Program is still running.
Close door. Wait to let the
program end.
BDW60MCL-C&L-IM-V01-EN.indd 34
12/19/14 2:45 PM
BDW60MCL Dishwasher
