29
Note!
Check that the door opens and shuts correctly, without fouling, after you
have completed the door reversal process.
After the door has been reversed, you should check the door seal of the
appliance. The seal should not be creased or crushed; otherwise there will
be a gap between it and the inside of the door.
•
The seal must adhere properly all the way around the door.
•
If the seal is not adhering to the cabinet properly, please:
Use a warm damp cloth and manipulate the seal until it does adhere to the cabinet
properly, all the way around the door.
Note!
Do not heat the door seal on anything but the lowest heat setting, or heat
the seal for a long period of time. Otherwise damage may be caused to the
door seal, which would not be rectified under the guarantee free of charge.
Pushing the appliance into the cabinet
03
Push the freezer into the cabinet. Use a spanner to adjust the height of the adjustable
feet to suit the height of the cabinet.
