background image

6

HINDL60CL 60cm Induction Hob

Getting 

started...

GB

IE

Safety

This appliance can be used by children aged 

from 8 years and above and persons with 

reduced physical, sensory or mental capabilities 

or lack of experience and knowledge if they 

have been given supervision or instruction 

concerning use of the appliance in a safe way 

and understand the hazards involved. Children 

shall not play with the appliance. Cleaning and 

user maintenance shall not be made by children 

unless they are older than 8 and supervised.

Keep the appliance and its cord out of reach of 

children less than 8 years.

Means for isolating the appliance must be 

incorporated in the fixed wiring in accordance 

with the current wiring regulations. An all-

pole disconnection switch having a contact 

separation of at least 3 mm in all poles should 

be connected in fixed wiring.

Regularly check the power plug and power 

cord for damage. If the supply cord is 

damaged, it must be replaced by a special 

cord or assembly available from the 

manufacturer or its service agent.

Make sure that the power cord is not caught 

under or in the appliance and avoid damage to 

the power cable.

HINDL60CL-C&L-A5-GB-IM-07.indd   6

10/9/13   3:37 PM

Summary of Contents for 5052931258666





































Reviews: