31
03
Setting the light
1. Touch the light button to turn the lamp on and off. The light button will flash.
2. Slide or touch the slider control to set the light intensity from 1-8.
WARNING:
Do not place anything on top of the control panel to avoid damaging
the motor.
ATL10380 000000041_28A 90CM Down Draft Hood 3mm R.indd 31
10/05/2017 19:36
0
4
Using The Timer
1.
To set the timer, the fan or light must also be in use.
2. Touch the timer button “
”and the timer will flash.
3. Each segment of the slider control from 1-8 represents 5 minutes each, allowing the timer
to be set from 5-40 minutes in total.
4. Select the correct segment to set the time, e.g. segment 3 for 15 minutes and press the
timer button “
”again to start, or the timer will start automatically after 5 seconds.
5. Once the time has expired, the hood will turn off automatically and close. To cancel the
timer during use, press the speed or light button.