Cooke & Lewis 3663602842019, Manual

Page: 11 / 20

11
Adjustment to a different type of gas
Caution: replacement of gas jets must only be carried out by a qualified gas installer.
Note: Extra gas jets are supplied to enable conversion for use with different gas types including liquid
petroleum gas (LPG) butane and propane. Details of the extra jets supplied and their applications
can be found in the Injector Table printed later in this manual. These jets must be replaced using a
dedicated specialist tool, not supplied.
Regulation of burners
Caution:
The regulation described can only be carried out with burners that use methane gas and
city gas (where available), and the screw must be fully tightened in a clockwise direction on burners
using LPG.
Caution: The Minimum position on the burners MUST be adjusted by a qualified gas engineer only.
Regulation of the “MINIMUM” position on the burners.
To regulate the minimum position on the burners, follow the procedure below:
1. Turn on the burner and turn the knob to its MINIMUM position (small flame).
2. Remove the burner knob and turn the fixing screw to the right or left until the flame of the burner
is regulated in the most suitable manner to MINIMUM and remains stable.
3. Make sure that the flame does not go out when changing the position quickly from MAXIMUM to
MINIMUM position.
TRAG10578 - 200000002 - 4 Burner Gas v3d Rv3.indd 11 13/06/2017 16:45