Exploded View
Assembly Instruction
Step 1:
Attach the Lid handle (A) with the Lid
handle holder (B) on the lid and the
Lid hanger (E) inside the lid, using Screw
(2) and Washer (3) to tighten down.
Step 2:
Install the Lid air vent (C) by Screw (4)
and Washer (5) and Nut (6).
Step 3:
Attach the Handle (I) with the Handle
holder (J) to the Fire bowl (K), using
Screw (2) and Washer (3) to tighten
down.
Step 4:
Put the Leg cap (L) on the legs (O) (P),
attach them to fire bowl one by one,
using Screw (1) and Washer (3) to
tighten down.
Step 5:
Insert the Bottom grid (Q) into the leg
ends. The bent tip goes into the holes of
long legs first, (with the bent tip pointing
in the opposite direction of the grill).
Then align and insert the other ends
into two short legs.
Step 6:
Sæt hjulene (R) på. Brug spændskiven
Insert Wheels (R), using Washer (7)
and secure with Nut (8) on both sides.
Note:
ONE HANDLE SHOULD BE
LOCATEED BETWEEN THE LONG LEGS
AND THE OTHER HANDLE SHOULE BE
LOCATED BETWEEN THE TWO SHORT
LEGS.
Step 1 og 2
Step 3
Step 4
Step 5 og 6
