10292004
Conwin’s
Masterpiece Series
Videos
Service & Warranty
For assistance with service & repair
issues, or for warranty information,
please visit
ConwinOnline.com
,
or call
(818)246.9233
These exciting instructional videos
feature the industry's top balloon
artists sharing their secrets of the
trade on everything from the latest
decorating techniques to business
management and marketing skills.
Visit ConwinOnline.com to see our
complete line of educational videos.
Galleries
Projects
...and more!
Online
Visit www.ConwinOnline.com today!
Designs
Hi-Float™ Power Pump
Instruction Sheet
1
Hold the balloon under the
Helium/Hi-Float Adapter with
the silver outlet in the center of the
balloon.
2
Press the button on the control box
to activate the Power Pump. Hold
down button until the pump depresses
fully. (Consult Balloon Size Chart at right)
Rub the balloon to evenly coat the inside
with Hi-Float. Be sure not to get Hi-Float
into the neck of the balloon.
Balloon Size Chart
11-inch Balloons
press button 1 time.
14-inch Balloons
Press button 2 times.
16-inch Balloons
Press button 3 times.
3
Tap the foot pedal of the
Duplicator 2 or Dual Sizer to
automatically inflate the balloon to
the perfect size. Pinch the neck of the
balloon and remove it from the filling
outlet. Wipe off any excess Hi-Float
from the outlet.
• If the balloons are going to be
treated and immediately inflated use
the T-4-2 Adapter on a helium cylin-
der. Use a wrench to tighten the T-4-
2 Adapter to the helium cylinder. The
T-4-2 Adapter will enable two regula-
tors to work off one helium cylinder.
Hand-tighten the Power Pump regu-
lator and the Duplicator 2 or Dual
Sizer regulator to the T-4-2 Adapter.
• If you’re pre-treating balloons with
Hi-Float to be inflated at a later time,
nitrogen is a more economical gas to
use.
• Follow Hi-Float’s charts and recom-
mendations to use the appropriate
amount of Hi-Float in the balloon.
• Visit www.Hi-Float.com to learn
more about working with Hi-Float.
Hi-Float™ Power Pump - Set Up
Tips
1
Connect the Power Pump regulator
to a nitrogen or helium cylinder.
2
Place a large bottle of Ultra
Hi-Float on the holder and
secure in place with the Velcro belt.
3
Hook the wire loop under the
pump handle. Place the 11-inch
Hi-Float clip on the Hi-Float
pump (included with the Hi-
Float pump).
Follow the instructions on the reverse page to set-up the Helium/Hi-Float Adapter.
Hi-Float™ Power Pump - Operating Instructions
T-4-2 Adapter
If pre-treating balloons to be filled with
helium at a later time, skip step 3.
