6.2 Starting a Cleaning Sequence
Prerequisites
■
Before starting a cleaning profile, read and understand the rules, risks, and hazards associated
with safely using the unit (as described in the operating manual) and follow all the corresponding
instructions.
■
You must have accessed the cleaning profile you want.
■
The C-Dial will light up with a solid green light.
Starting a Cleaning Sequence
1.
Quickly press the C-Dial to start the cleaning se‐
quence.
Result: The cleaning profile will start immediately
and the C-Dial will light up with a solid yellow light.
Next steps:
■
Stopping the cleaning sequence. For more information, please refer to page 44
■
Clean with the cleaning profile (for more on how to do this, please refer to the 'How to Clean the
Combi Oven' section in the operating manual)
6.3 Stopping a Cleaning Sequence
Prerequisites
■
You must have accessed a cleaning profile.
■
You must have started the cleaning profile.
■
The C-Dial will light up with a solid yellow light.
Stopping a Cleaning Sequence
1.
Press the C-Dial to stop the cleaning process.
Result: The cleaning sequence will stop (only pos‐
sible if no cleaning agent has been added yet). The
C-Dial will light up with a solid green light.
6 Cleaning with easyDial
44
