Manual CC-7130 / CC-7131
11
2.3
Connecting Serial Ports
The serial port(RS-485) in CC-7130
/CC-7131
can be connected to external equipment such as PTZ receiver etc.
Then, PC client can send PTZ commands to the external equipment via serial port. When a decoder system
instead of PC client is connected to CC-7130
/CC-7131
the serial port of CC-7130
/CC-7131
and that of the
decoder system works in pass-through mode. That is, data at one port are delivered to the other port, vice versa.
2.4
Connecting Sensor and Alarm
Connect sensor and alarm devices to corresponding terminals accordingly.
2.5
Connecting Power
After confirming the power source, connect power adaptor and connect the 12VDC connector to the system.
Soon the system will boot up to an operating mode.
2.6
Check if It Works
As soon as the power is supplied to the system, it will boot and, after about 30 seconds, the system will be ready
for operation.
