Convision CC-6601-B, Manual

Page: 11 / 120

14
WDR Digital Sensor Day/Night H.264 Network Camera
15
WDR Digital Sensor Day/Night H.264 Network Camera
Take off the lens protection cap and attach
the CS-Mount lens to the camera by screwing
it in clockwise.
Note
ื
Use the specified lens connection parts as shown in the picture below.
Using of the wrong sized parts may cause damage
to the inside of the camera or result in poor fitting.
ื
Using oa lens which is too heavy affects the balance
of the camera and may cause a malfunction. Please
use a lens that weighs less than 450g.
ื
Select Av mode, if possible, when adjusting
the automatic light control (ALC) of an auto lens.
Use of PK mode may cause hunting.
1. Take off the lens protection cap and
attach the C-mount adaptor.
2. Attach the C-Mount lens to the
camera by screwing it in clockwise.
When using a CS-Mount lens
When using a C-Mount lens
̰
Installation Procedures
DC IRIS
RESET POWER
VIDEO
+12V DC
MIC
SPEAKER
LAN/802.3af
ALARM SENSOR
RS485
Connect the video output terminal located on the back of the camera
to the monitor.
̰G
Connecting to a monitor
Check the standard power requirement before connecting to power.
̰G
Connecting to power
DC power adapter (DC12V,500mA
˦
)
+12V DC
WAN
Network Switch
IP Camera
PC
DC IRIS
RESET POWER
VIDEO
+12V DC
MIC
SPEAKER
LAN/802.3af
ALARM SENSOR
RS485