Convey HC-1EX Server Quick Start Guide v1.3
3
2
Installation and Setup
This chapter gives information on the unpacking, installation and basic setup of the
Convey HC-1EX Server System.
At Delivery
2.1
Each HC-1EX Server System comes packaged in its own corrugated box. Confirm that
the box is undamaged before releasing the freight carrier. Note any other damage on the
shipping documentation. If the system is damaged, contact Convey support.
In larger systems, more than one system may be packaged on a pallet, and it is always
best to inspect each box for damage.
Depending upon the exact configuration of the system, multiple boxes may be required to
complete the delivery of all components. The total quantity of boxes should be clearly
identified in the shipping documentation, so confirm that all boxes have been delivered
prior to releasing the freight carrier.
Unpacking
2.2
Carefully open the upper flaps of the Convey HC-1EX shipping container. The unit may
be removed by pulling the foam packing inserts on the top. The unit may then be lifted
out of the box.
Use caution in lifting since the total weight of the unit may exceed 25Kg. Two person lift is
suggested.
Convey Server HC-1EX Contents
2.3
Your Convey System HC-1EX ships with the following items:
Intel® Server Board S5400SF, installed in the SR1560SFHS base server system
One 600 W power supply, installed in the base server subsystem
One 920 W power supply installed in the Convey CP subsystem
PCIe* riser card assembly, installed in the base server system (PCIe card
optional)
Optical drive tray assembly and filler panel (drive is optional)
Open-me-first envelope
Rack mount brackets
Slide pair
Standard control panel module installed in the base server system
One Hot swap Drive assembly (size optional)
Two hot-swap drive trays and drive filler blanks (population and size optional)
System fan assembly, including five dual-rotor fans, installed in the base server
system
