from the dropdown and then clicking the “Upload” icon. Before
accepting the upload, the software will check and verify that the
EDID’s header and checksum values are acceptable.
•
To analyze any EDID stored within the unit, select the EDID to view
from the dropdown and click on the “Analysis” icon. From the Analyzer
window it is possible to open the currently analyzed EDID in the “EDID
Creator” by clicking the “Edit” button.
EDID Creator
Click on the “EDID Creator” tab to begin designing a new EDID from
scratch (select the “New” icon), to modify an existing EDID stored on
the PC as a *.bin file (select the “Load” icon) or to edit an EDID copied
from the unit via the EDID Analyzer’s edit option. Selecting “New” will
automatically populate the various EDID fields with basic information
that can be easily edited to match the user’s preferences. Clicking
on the “Load” icon will open a file load window and after the *.bin file
has been selected and loaded the EDID fields will be populated with
the information from that file. The same will happen when the EDID is
copied from the “EDID Analyzer” window.
The following tabs provide access to a wide range of EDID information
which can be edited:
•
Descriptor:
This tab allows for the editing of various description and information
fields within the EDID file such as Manufacturer Name,
Monitor Name, etc.
•
PC Timing & SD/HD/UHD:
These tabs allow for the selection of the resolutions and refresh rates
that the EDID will report as supported.
•
Audio1 & Audio2:
These tabs allow for the selection of which audio formats, audio
frequencies, channels and speaker locations are supported.
•
Color Space:
This tab allows for the selection of which color formats
and bit depths are supported, including BT.2020 and HDR support
options.
•
Others:
