Operation Control and Functions
The video system converter connected between a VCR, satellite receiver, camcorder and
your colour TV will enable you to view another video system on the local TV system.
Front Panel
1. PAL-M
- Set the switch to either PAL-M or PAL-N signal. PAL-M is a broadcast
signal used only in Brazil.
2. PAL-N
- Set the switch to either PAL-M or PAL-N signal. PAL-N is a broadcast
signal used in many countries.
3. Output- Video-
This is the Video output port.
A composite video RCA connector
cable is used to connect the converter to your Video device.
4. Output- Audio-
This is the Audio output port.
A phone jack 3.5-connector cable
is used to connect the converter to your Audio device.
Rear Panel
1. DC- 7.5 V-
This is the power supply input port. It is to be used with the power
pack supplied. The power supply is available in 110 V or 220 V.
2. Input- Video-
This is the Video input port. Connect this to your Video device
using a composite video RCA connector.
3. Input- Audio-
This is the Audio input port. Connect this to your Audio device
using a phone jack 3.5.
Please browse our online catalogue to view our full product range.
44-48 Maitland Road, Mayfield East, NSW, 2304 Australia,
Phone +61 249689313 Fax +61 249689314
www.converters.tv
