1.
DVI Out-
This is the DVI Output port. Connect the port to your device
using the DVI digital cable.
2.
The Menu button
- This brings up the menu and it is used as a
enter/select button for menu options.
3.
The – button
- This is used to scroll through options or to adjust
selected options.
4.
The + button
- This is used to scroll through options or to adjust
selected options.
It also doubles as the input button, which is used to cycle through inputs
such as
Composite, S-Video, YCbCr and RGBs.
Rear Panel
1.
YCbCr RGB IN-
this is a component input for component out devices.
For this port the connectors included are:
- 8 PIN Din Connector to 3 x RCA which are colour coded
for red, blue, green inputs. You may also insert into these
pins your RGBs (RGB sync on green device).
2.
SV IN
- this is the S-Video IN, which is for 5 Pin S-Video cable.
This connector is not included in kit.
3.
CV IN
- this is composite video for use with AV/RCA devices.
For this port the connector included:
- A single RCA cord.
4.
Power
-
DC 5V
- to be used with the power pack supplied, this power
pack will accept all country voltages, please however make sure you use
the right adapter plug to suit your wall socket.
1. Please note this device only alters the video signal, the audio
signal, goes directly from your output device to your input
device.
2. Video quality may alter depending on a number of factors:
