System Requirements
•
HDMI equipped source devices, connect with HDMI cables or
DVI equipped source, connect with DVI to HDMI cables
•
HDMI equipped displays (TVs or monitors) or HDMI equipped
AV receivers, connected with HDMI cables
•
Industry standard CAT5e/6/7 cables
•
HDBaseT™ Receivers (CH-506RX, CH-507RX or CH-1109RX)
Operation Controls
and Functions
Front Panel
1
LCM:
Displays the setting information of each input and output
setting.
2
POWER:
Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3
LOCK:
Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate green when locked.
4
IR:
IR Receiver window (accepts the remote control signal of this
device only) with IR frequency of 38
kHz.
5
MENU:
Press this button to access the LCM menu system, from
here EDID settings can be managed and IP system settings are
displayed.
6
1~8/A~H and OUT/IN:
Press the OUT or IN button to select the
output or input mode and then press the required number button
to make the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
