Converters.TV 878, Operation Manual

Page: 4 / 11

6.7 Video Resolution
This LED shows the output video resolution according to
the display monitor or TV or the built-in EDID.
6.8 OSD Upper Layer: This LED shows the device’s mode or the upper level of
the OSD selection.
6.9 OSD Lower Layer: This LED shows from the upper level to the lower level of
the OSD selection but the default will always goes back to the main volume
setting.
6.10 Volume: This LED shows the present volume setting.
6.11 Speaker: These LEDs shows the output speaker connection.
⑦
IR window:
This is the IR receiver window which receive IR signal from the
remote control included in the device package.
⑧
Menu/Volume wheel:
Turn this wheel to turn up or down the volume or
when selecting the OSD turn it to right or left to bring in and out the OSD
Rear Panel
①
Analog Audio Input:
These slots are for connecting the analog audio signal
from input source equipment such as Set-top-Box or VCR with RCA cables.
②
HDMI Input 1~4: These slots are for connecting the input source equipments
such as DVD or Blue-Ray player for both video and audio signal input with
HDMI cables.
③ SUB Out:
This slot is to connect to the subwoofer speaker for subwoofer
sound display.
④
HDMI Out:
This slot is to connect with display equipment such as amplifier or
HD TV/monitor for output signal display with HDMI cable.
⑤
COAX In: This slot is to connect with input source equipment such as DVD or
Set-Top-Box for audio signal input with coaxial cable.
⑥
Service: This slot is reserved for manufacturing service only.
⑦ DC 24V:
This slot is to connect with power adaptor and power cord included
in the package and connect it to the AC wall outlet for power supply.
⑧
Speaker Output: These slots are for connecting the output speakers up to
7.1CH for audio output signal display with speaker’s bare wire cable.