Operation
Controls and
Functions
Front Panel
POWER selection button
①
- Press the button once to power on the unit,
press again to power off. This device has last memory’s function and will
record your last input selection. The factory default is on CV input.
INPUT selection bottom
②
-
- Yellow LED illuminates when composite video is selected.
- Green LED illuminates when S-Video is selected.
AUTO selection button
③
- Press the button to set the device in Auto
mode and the device will auto detected HDMI display’s EDID resolution
native then the resolution indicator LED will illuminate.
MANUAL selection button
④
- Press “MANUAL” button to select
resolution of the HDMI output from VGA to 1080P.
Rear Panel
HDMI OUTPUT
①
– Connect to LCD TV/monitor with HDMI cable.
Note:
1. This scaler does not have overscan function however, it may be
adjusted by TV.
2. Audio sound will not perform if no input image.
