Operating Functions
and
Controls
Front Panel
The following sections describe the hardware components of the unit.
1.
YPbPr/RGB switch:
Set the switch to RGB when your HDMI source equipment is PC
graphic card or other digital RGB source signal. Use HD-15 to HD-15
VGA cable to connect between the unit's RGB out and the RGB input
of your PC monitor, or projector. Set the switch to YPbPr when your
HDMI source equipment is DVD player, set-top-box or other High
definition digital video source. Use a VGA to 3 RCA adaptor cable to
connect the unit's YPbPr out to the YPbPr input connector of your
HDTV.
Note: When YPbPr output from HD-15 D-Sub the H-pin and V-pin will
remain the signal at the same time.
2. HDMI input:
Connect the HDMI input port to the HDMI output port of
your source equipment such as DVD player or set-top-box.
3. Power:
Plug the 5VDC power supply into the unit and connect the adaptor to
AC wall outlet.
Rear Panel
1. HD-15 D-Sub output:
Connect the output port to the PC/YPbPr input of
analog PC monitor, Projector or TV.
2 L/R:
Stereo audio output via 3.5mm phone jack.
