1. Mode:
Press the button repeatedly will toggle through the following adjust
controls:
Source
Resolution
Output
Aspect
3D Enhance
Digital NR
Sources....
Source mode:
While under this mode, press
or
button to
choose your desired input source from Video, S-Video, Component
or PC inputs.
Resolution mode:
If output is selected as RGB, press
or
button
to choose from 640 x 480(VGA), 800 x 600 (SVGA), 1024 x 768(XGA),
or 1280 x 1024(SXGA) PC output. If output is selected as YPbPr press
or
to choose from 480p, 576p,720P or 1080i HDTV output.
Output mode:
Press
or
to select between PC RGB output and
HDTV YPbPr output.
Aspect mode:
Press
or
to choose between standard, 4:3
aspect and wide(16:9) aspect ratio.
3D Enchance mode:
To turn on
or off the 3D comb filter function.
Digital NR mode:
To turn on or turn off the digital noise reduction
function.
2.
Picture:
Press the button to toggle through picture adjust parameters as
follows: Contrast
Bright
Color
Hue
Detail
Contrast
Contrast:
Press
or
to adjust contrast level. The range of
adjustment is 0~63. Factory default value is 58.
Bright:
Press
or
to adjust Brightness level. The range of
adjustment is 0~63. Factory default value is 31.
Color:
Press
or
to adjust color level. The range of adjustment
is 0~63. Factory default value is 31.
Hue:
Press
or
to adjust NTSC Hue level. The range of
adjustment is 0~63. Factory defaults value is 31.
Detail:
Press
or
to adjust Detail level. The range of
adjustment is 0~63. Factory defaults at 10.
3.
,
: Press to toggle through various adjust controls or to alter
setting value.
4.
Source/Input Selection:
Press one of the four input buttons allows
manual selection of the corresponding video source signal.
Video:
Press this button to select the Composite Video source and
the built-in yellow led will illuminate when it's selected.
S-Video:
Press this button to select the S-Video source and the built-
in yellow led will illuminate when it's selected.
YPbPr:
Press this button to select the Component Video (YCbCr or
YPbPr) source and the built-in yellow led will illuminate when it's
selected.
PC:
Press this button to select the PC source and the built-in yellow
led will illuminate when it's selected.
5.
Output Resolution Selection:
Press one of the four output buttons allows
manual selection of the corresponding output resolutions. - When the "6"
buttion is illuminated, press to select desired PC output resolutions for
VGA, SVGA, XGA or SXGA. - When the "6" buttion is off, press to select
desired HDTV output resolutions for 480p, 576p, 720p or 1080i.
VGA/480p:
Press this button to select either VGA or 480p output
resolution and the built-in red led will illuminate when it's selected.
SVGA/576p:
Press this button to select either SVGA or 576p output
resolution and the built-in red led will illuminate when it's selected.
XGA/720p:
Press this button to select either XGA or 720p output
resolution and the built-in red led will illuminate when it's selected.
