Rear Panel
1. Scart In-
This is your RGB SCART input port. Signal input to scart
jack.
Installation
The AC adaptor power unit should not be plugged into a wall outlet until
all connections are complete.
- Using your connector cable connect the RGB input port (Number 5
on the rear panel) to your DVD or VCR.
- Using your connector cable connect the output port (Number 2/3/4
on the rear panel) to your plasma TV or projection TV.
- Connect your power supply adaptor to the power supply input port.
Once all connections are complete please connect the power supply
provided to the power socket
Specifications
Input signal:
1 scart jack which contains:
1 x composite video- 1Vp-p 75ohm,
1 x RGB- 0.7 Vp-p 75 ohm
Output signal:
3 RCA jacks
Y: 1 Vp-p 75 ohm,
B-Y: 0.7 Vp-p 75 ohm,
R-Y: 0.7 Vp-p ohm
Power supply:
DC In 7.5V 500mA Centre positive
