Remote Control
1. Display:
Press the button to display input source
and output resolution on the screen.
2. Power:
Power ON/OFF button.
3. VGA-Pseudo 1080i:
Press to select your desired
output resolution.
4. Picture:
Press the button to enter picture adjust
submenu. Use +,- button to move cursor (V)
up/down to your desired parameter, press "Picture"
again to confirm.
5.
+/-: Press to move up/down the cursor (V) to
your desired parameter,or press to
increase/decrease the setting value.
6. Reset:
Press to reset all setting back to
7.
factory default value.
8. Exit:
To exit OSD.
9. SCART 1:
Press the button to select scart 1 input.
10. SCART 2:
Press the button to select scart 2 input.
11. Composite:
Press the button to select composite
video input.
12. SVideo:
Press the button to select SVideo input
