Web GUI Control
On a PC/Laptop that is connected to the same active network as the Matrix, open
a web browser and type device's IP address on the web address entry bar. The
browser will display the device's status, control and User setting pages.
Click on the 'Control' tab to control power, input/output ports, EDID and reset
mode.
Clicking on the 'User Setting' tab allows you to reset the IP configuration. The
system will ask for a reboot of the device every time any of the settings are
changed. The IP address needed to access the Web GUI control will also need
to be changed accordingly on the web address entry bar.
