Converters.TV 15376, Operation Manual

Page: 5 / 13

RS-232 & Telnet
Commands
Command Name Description Description of Parameter
P0 Power Off (Standby) NONE
P1 Power On NONE
A N Select Input N N=1-4
IPCONFIG Display The Current IP
Configure NONE
SIPADDR XXX.XXX.
XXX.XXX Set Ethernet IP
Address XXX=0~255
SNETMASK
XXX.XXX.
XXX.XXX
Set Ethernet Net Mask
XXX=0~255
SGATEWAY
XXX.XXX.
XXX.XXX Set Ethernet
Gateway XXX=0~255
HTTPPORT N Set Http Port Number N=0~65535
RSTIP IP Configuration
Reset To <DHCP> NONE
EDIDMODE N Show EDID Mode N=0(Appoint), 1(All)
EDIDALL Show EDID Mode
Source For All NONE
EDIDALL N Set EDID Mode Source For All
N=1-9
EDIDIN Show Input EDID
Source NONE
EDIDIN N1 Show Input N1 EDID
Source N1=1-4
EDIDIN N1 N2 Set Input N1 EDID
Source N1=1-4 N2=1-9
HDCPIN Input HDCP Status NONE
HDCPIN N1 Show Input N1 HDCP
Status N1=1-4
HDCPIN N1 N2 Set Input N1 HDCP
On/Off* N1=1-4 N2=0(OFF),
1(ON)
SOURCEDET Show All Input Signal NONE
SOURCEDET N1 Show Input N1 Signal N1=1-4