Introduction
The UHD Scaler is designed to extend and upscale HDMI signal on to two HDMI output
displays and one analog audio simultaneously. It supports 4Kx2K, 3D, 36-bit Deep Color,
Hi-Def. lossless audio and other features defined by the latest HDMI specifications.
Allowing uncompressed video and audio, as well as bi-directional IR control, RS-232
pass through, and LAN serving from a single CAT5e/6/7 cable over 100m of distance.
The management of source/sink scenarios can be operated easily through on-panel
buttons, OSD, IR remote control, RS-232 and WebGUI control.
Applications
•
Extending incoming signal through CAT5e/6/7 to HDMI outputs
•
Scale up HDMI input low resolution video on High-Definition display
•
Scale down HD signal down monitor
•
Lecture room/showroom/Meeting room/Classroom display and control
•
Public Commercial Display extension
Features
•
HDMI with
3D supported, and HDCP compliant
•
Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30, &
4096x2160@24)
•
Supports scale down HD resolution on to monitor/display
•
Supports data rate from 300Mbps to 3Gbps and Deep Color up to 1080p 36-bit
•
Supports simultaneous HDMI outputs with different resolution setting
•
Supports LPCM 2/5.1/7.1CH,Dolby Digital 2~5.1CH, DTS 2~5.1CH, Dolby
TrueHD and DTS-HD Master Audio (Pass through)
•
Extend HDMI, IR, RS-232 signal up to 100m through CAT5e/6/7 cable
•
Supports Balanced audio and bi-directional IR control
•
Supports Ethernet transmission rate up to 100Mbps
•
Supports OSD, o
n-panel, Remote, RS-232 and WebGUI control
Note:
This system was tested with CAT6/23AWG cable, result may vary with cable of a
different specification.
System
Requirements
HDBaseT compatible Transmitter input and PS3/Blu-ray player and output HDMI
TV/Display with connection cables.
