13.
MENU:
Press to enter into the menu.
14. +/-:
Press these buttons to move up/down under menu selection.
15.
PRESET:
Press “PRESET”, the OLED menu will show Preset then select
IN 1~4. Preset 5~8 selection, press IN 1/2/3/4 twice. Press “TAKE” to
confirm the selection or press “CANCEL” to exit the selection.
16.
All:
Press this button to select all outputs with an selection.
17.
LOCK:
Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
18.
LCM:
Displaying Input and Outputs selection and menu selection.
Rear Views
1.
HDMI IN:
Connect from source equipments such as Blu-ray/DVD/
PS3 players, Set-Top-Box or any HDMI equipped source device for
input signal sending.
2.
HDMI OUT:
Connect to HDMI TV/display or HD Amplifier for output image and or
audio display.
3.
OPTICAL IN:
Connect from source equipment such as DVD, Blu-ray, PS3 or etc. with
audio signal.
4.
OPTICAL OUT:
Connect to active speaker or audio amplifier for audio distribution.
5.
AUDIO-CAT:
Connect this port to the AUDIO-CAT input of the Receiver unit using
CAT5e/6/7 cable.
6.
SERVICE:
This slot is reserved for firmware update use only.
7.
CONTROL:
Connect from PC/Laptop with active internet service for Web GUI
control with RJ-45 terminated cable.
8.
RS232:
Connect from PC/Laptop for RS-232 command sending to control the
device.
