Input Source
Scaler Output
Bypass Output
1080p
1080P
1080P
4K2K
1080P
4K2K
Note:
Displaying HDMI 4Kx2K contents, equivalent source signal and
HDMI cable are required on BYPASS output connection.
3. HDMI IN:
Connect from HDMI source equipment such as Blu-ray/DVD
player with or without 4K2K signal.
4. SERVICE 2
: This slot is reserved for factory use only.
5. 4K2K / 1080P LED:
These LED will illuminate according to input source
signal’s resolution when both LED are illuminating it state the input source’s
signal does not belong to 4K2K/1080P@24.
6. DC 5V IN:
Connect 5V DC power supply into the unit and connect the
adaptor to an AC outlet.
Back Panel
1. RS-232:
This slot is reserve for factory use only.
2. SERVICE 1:
This slot is reserve for factory use only.
3. POWER LED:
This LED will illuminate when the device is connected
with power supply.
4. BYPASS 4K2K:
This LED will illuminate when the input signal contains
with 4K2K resolution.
5. MENU:
Press this button to enter into OSD menu.
6. -/+:
Press this button to scroll down/up the menu selection. Press “-“ with
“ENTER” button to switch SCALER output resolution to 720p instantly
or press “+” with “ENTER” button to switch SCALER output resolution
to XGA instantly.
7. ENTER:
Press this button to enter or confirm the selection.
