RS-232 Commands
Command
Description
A1~A4
Switch Output A to 1~4
B1~B4
Switch Output B to 1~4
AB... 1~AB... 4
Switch Output A B ... to 1~4 at the same
time
SETIP <IP> <SUBNET> <GW>
Setting IP. SubNet. GateWay
<Static IP>
RSTIP
IP configuration was reset to
factory default<DHCP>
IPCONFIG
Display the current IP config
P0
Power Off
P1
Power On
L1~L4
Switch all the output to 1~4
ST
Display the current matrix state and
firmware version
RS
System Reset to A1, B1
EM1~EM2
Setting EDID MODE. 1-STD 2-TV
?
Display all available commands
Note:
RS-232 commands will not execute unless followed by a carriage return.
Commands are not case sensitive.
