Pairing with Bluetooth devices
Pairing your CS10 to a Bluetooth device like smartphones
and computers is a simple one-time operation. Your CS10
will seek and attempt to pair with Bluetooth devices for 3
minutes each time the battery is attached. After that time,
if no devices have been detected, the unit will stop trying
to pair and the Bluetooth transmission will be turned off.
1.
Be certain the Bluetooth function is turned on for any
device you wish to pair with. (See device instructions
for specific details.)
2.
Attach a charged battery to the CS10.
3.
Watch device you are trying to pair with for CS10
to be detected. CS10 should appear on the screen.
If asked for a pin, enter “0000”.
4.
Select the CS10 from list of Bluetooth devices to
ensure pairing.
Note:
For best results the CS10 should be within 10
feet of the Bluetooth device.
USING YOUR CS10
Answering phone calls
1.
To answer a telephone call, press the CS10 volume
button. On some phones, you may need to select the
CS10 when answering a call.
2.
During phone calls, the volume button can be used
to control the volume of the call. Press to increase
volume, push and hold to decrease volume.
3.
To hang up, press the CS10 program button or end
the call with the phone’s controls.
4.
Do not push the program button during a call.
The call could be terminated.
Note:
For best results, place phone on same side of
body as CS10.
Advanced customization
For even more options to personalize the performance
of your CS10 please visit
www.conversionsound.com/apps
.
There you can download smartphone or computer
applications will allow you to further adjust settings
within your CS10 via Bluetooth link.
14
15
