- The AWC is on but
the display of the devi-
ces stays on.
- Press any key on the
device.
- Does the Apéro display
show «AU»
- Is the purple wire (pilot
wire) connected with the
black wire of the Apéro
- Is the production date
16/11 or older on the
Apéro Digital 7359
heater
- Connect the purple wire
(pilot wire) with the Apéro
black wire.
- The screen must display
«AU» and then the set
temperature.
- The AWC is compatible
only with these devices.
- In a room with multiple
devices controlled by the
same AWC, one device
generates lots of heat and
the others are cold.
- Redo this verification in the
evening when there is no acti-
vity or other sources of heat in
this room
- If the problem persists,
contact CONVECTAIR for
more information and to
perform a simple adjustment to
calibrate the thermostats.
- The AWC displays
21° (for example) while
it is much warmer in the
room
- Are the devices heating
- The AWC displays the set
temperature not the ambient
temperature. This situation
is normal when the room
is warmer than the set
temperature (for example, in
summer).
- If the heaters overheat the
room, contact CONVECTAIR
for more information.
18.