10.
Operation and Maintenance TIPS
Your CONVECTAIR heater will become hot when in use. Caution is advised when
young children are present.
Do not insert small objects through the front louvers : this could cause electrical short-
circuit, fire or damage to the inner components.
Any use or modifications not approved by CONVECTAIR may cause electrical short-
circuits, fire or injuries to the users.
In certain cases, it is possible for yellowing of the grille to occur over time. This is
not due to a manufacturing defect. This is caused by surrounding air, which contains
smoke or dust, being heated and released through grille.
Prevention :
it is suggested that grilles be frequently cleaned especially
with units installed in locations where cigarette smoke is present or in the
kitchen. Never use this heater during construction work or other activities
that generate a lot of dust.
Note :
The first time your CONVECTAIR heats, a light smoke could be
released. This is normal and should disappear after about 2 to 3 minutes.
diagnostics
7
IF YOUR CONVECTAIR DOES NOT HEAT :
Before calling your electrician, please go through these simple checks:
1-
Make sure the breaker in the distribution panel is in the "ON" position.
2-
Check that the function selector switch is on . Turn the setting dial to
position 9.
3-
Check the overheat protection : first remove any obstruction from the inlet
and outlet grilles ; then reset the overheat button (see : Temperature limiting
controls).
4-
If the light is still off, and no heat is generated, call your electrician or the
nearest CONVECTAIR repair center.
