Align the screw holes on the fan and base.
Screw the base stand into position and
feed the power cord through the retention
slots.
The remote control is stored in the
remote control holder located at the top
of the rear enclosure as shown in Fig 3.
Remote Control Storage
Replacing The Battery
Your remote control is supplied with
batteries. Open the battery cover and
insert the batteries. Check the polarity
is correct and replace the back cover
(Fig 4).
The remote control can be used from up
to 6m away. Note: if there are two or
more fans within this distance, both will
be operated by the same remote control.
Component List
Assembly
1 Control Panel
2 Display Panel
3 Remote Control
4 Air Outlet
5 Air inlet
6 Power Cord & Plug
7 Base Front
8 Base Rear
9 Screws x 3
Unpack the fan and check that you have
all of the components.
Remove the screws from the base.
Assemble the front and rear base halves
together onto the main fan body, pulling
the cable through the central hole
between them (Fig 2).
2
CTF09
ASSEMBLY
Operation
Insert the power plug into the power
outlet.
The fan can be controlled by the buttons
on the control panel or the remote
control (refer Fig 5 below).
CONTROL PANEL
DISPLAY PANEL
OPERATION
®
SEELEY INTERNATIONAL –
OWNER’S MANUAL
3
2
SCREWS
1
1
8
6
5
2
4
7
9
3
3
4
5
½
H 1H
2H
4H
Press the
button to turn the fan ON /
OFF.
Press the
button to select the
desired fan speed (low
,
medium
or high
).
Press the
button on the control
panel to enable the swing function. The
fan will swing from side to side. Press
again to stop oscillation.
Note: Do not force or hinder the
oscillation movement !
The fan direction can also be adjusted
by rotating the fan body on the base as
shown in Fig 6
Swing Function
6
Summary of Contents for CoolTower CTF09
Page 1: ...English CTF09 OWNER S MANUAL CoolTower CTF09...
Page 2: ......
