Remote Control Storage
Replacing the battery
The remote control is stored in the
remote control holder located at the top
of the rear enclosure as shown in Fig 2.
Your remote control is supplied with
batteries. To begin use, open the
battery cover and remove the plastic tag
located between the two batteries (Fig
3). Check the polarity is correct and
replace the back cover.
When the fan’s power is on, the remote
control can be used to operate the fan
from up to 6m away. Note: if there are
two or more fans within this distance,
both will be operated by the same
remote control.
Component List
Assembly
1 Remote Control
2 Main Body
3 Base
4 Base Screws x3
5 Clamp Screws x2
6 Power Cord & Plug
Unpack the fan and check that you have
all of the components.
Remove the screws from the base,
locate the base onto the main fan body
and screw into position.
Screw the cord clamp into position on
the base.
2
CTF05
ASSEMBLY
O n - G r e e n
O ff- L ig h t O ff
O n - G r e e n
O ff- L ig h t O ff
L o w s p e e d -R e d
M id s p e e d -O ra n g e
H ig h s p e e d -G re e n
1 8 0 D e g r e e -G re e n
1 2 0 D e g r e e -O ra n g e
6 0 D e g r e e -R e d
D is a b le - L ig h t O ff
2 h o u rs -R e d
4 h o u rs -O ra n g e
8 h o u rs -G re e n
D is a b le - L ig h t O ff
P O W E R -- T o s ta rt o r s to p th e fa n
S P E E D -- T o a d ju s t th e s p e e d le v e l: lo w / m e d iu m / h ig h
O S C IL L A T IO N -- T o s e t o s c illa tio n a n g le o r s to p o s c illa tio n
T IM E R -- T o s e t th e tim e r le v e l: 2 /4 /8 h o u rs
W IN D - - T o s e t n o r m a l w in d o r n a tu ra l w in d m o d e
L E D
B u tto n
F u n c tio n
Operation
Wind Function
Insert the plug into the power outlet.
Turn the fan ON by pressing the
‘POWER’ button on the unit or remote
control
(refer Fig 4). The fan will
rotate to the operation position as
shown (Fig 5).
Each button press will change the
colour & illumination of the LED display
as indicated in Fig 4. Select the desired
fan speed (low-med-high) by pressing
the FAN button. Each press will cycle
between the speeds.
Turn the fan OFF by pressing the
‘POWER’ button at any time.
The fan has a natural wind function
which simulates a changing breeze. To
activate, press the ‘WIND’ On/Off button
on the control panel.
OPERATION
Timer Function
The fan has a timer function that will
turn off the fan. By pressing the timer
button 2, 4 and 8 hour delays are
available. To cancel, press the button
until the timer indicators are no longer lit.
Press the oscillation button on the
control panel to enable the oscillation
function. The fan will swing from side to
side in a 60°, 120° or 180° arc. Press
again to stop oscillation.
Do not force or hinder the oscillation
movement. All LEDs will flash if any
abnormal restriction occurs.
Oscillation Function
®
SEELEY INTERNATIONAL –
OWNER’S MANUAL
3
1
2
3
4
5
Press the power button to start the fan.
Note: The fan will rotate anti-clockwise as shown.
Once power is turned off unit will rotate clockwise
and return to its home position .
On: Green
Off: Light Off
Low Speed: Red
Mid Speed: Orange
High Speed: Green
On: Orange
Off: Light Off
2 hours:
Red
4 hours:
Orange
8 hours:
Green
Disable:
Light Off
180 Degree: Green
120 Degree: Orange
60 Degree:
Red
Disable:
Light Off
Summary of Contents for CoolTower CTF05
Page 1: ...English CTF05 OWNER S MANUAL CoolTower CTF05...
Page 2: ......
