OWNER’S MANUAL
|
Make sure that the device is switched off
before cleaning.
Wipe the surface of the fan by using a clean
damp cloth.
Do not use chemical liquids when cleaning
the fan.
Do not submerge the fan in water.
Storing in its original packaging is highly
recommended.
CLEANING AND STORING
4
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe treatment.
CLEANING THE FILTERS
Ensure that the fan is switched off at the
supply mains before removing the air inlet
grille.
1. Remove the screw on the on the side of the
air inlet grille, as shown in Fig. 4.
2. Rotate the air inlet grille to remove (Fig. 4).
3.
Remove the filter and clean using a vacuum
cleaner or tap the panel lightly to remove
loose dust and dirt and then rinse under
running water (no hotter than 40°C).
4. Dry thoroughly before replacing.
Note!
To maximize the efficiency of the fan,
clean the filters regularly.
Note!
Never operate the fan without the filters
and air inlet grille installed.
4
