Convaid Rodeo Q2 2014, Manual

Page: 30 / 30

Rear Anti-Tip Tubes
New Accessory Option - Instructions
1.
To install the anti-tip tube, align
the tube with the end of the round
frame tubing located next to the
rear wheel.
Fig. 1
2.
Push the detent pin while
positioning the anti-tip tube onto
the round frame tubing, and push
until the “release button” pops
through the hole located on the
anti tip tube.
Fig. 2
3.
Repeat steps 1 & 2 for opposite
side.
4.
To remove the anti-tip tubes,
perform above steps in reverse
order.
Fig. 1
Fig. 2