465
505
405
320
180
330
Ø125
Air inlet Ø65
400
380
Ø125
590
660
330
595
295
170
Air inlet Ø65
C i6
545
625
GB
100
Type approved in accordance with:
European standard EN-13229 (DE/A),
DINplus,
Part 15a B-VG in accordance with test
report
RRF- 29 12 3029
Norwegian standard, SINTEF 110-0391
Type approved in SE in accordance with
SITAC xxx
Flue connection - Rear
Flue connection - Top
Output
3-7 kW
Nominal output 5 kW
Efficiency
78 %
Weight (kg)
80
Width (mm)
595
Depth (mm)
405
Height (mm)
505
FACTS
Dimensions
Technical details
Cast iron front
Connection dimensions
Glass front
Important to remember!
Installation by authorised
technician
This manual contains instructions about
how the insert must be assembled and
installed. To ensure the function and safety
of the insert, we recommend that the
installation is carried out by an authorised
technician. Contact one of our dealers who
can recommend suitable fitters.
Building permission
Before installing a stove or erecting a
chimney, it is necessary for you to make an
application for building permission to your
local authority. Ask your local authority for
advice regarding building regulations and
the application.
Structural support
Check that the wood joists are strong
enough to bear the weight of the stove and
chimney. The stove and chimney can usually
be placed on a normal wooden joist in a
single occupancy house, if the total weight
does not exceed 400 kg.
Hearth plate
Due to the risk of falling embers, a
flammable floor must be protected by
a hearth plate. The hearth plate must
extend 300mm in front of the hearth and
can consist of natural stone, concrete,
metal or glass.
The minimum distance in front of the
hearth to combustible parts of the building
or interior decoration must be at least 1
metre.