HTR-10
4
6. FEATURES
1.
LCD
with
current
relative
humidity.
2.
LCD
with
current
temperature.
3.
Operating
buttons.
4. Blue LED indicates the current
capacity of the humidifier
(identical to the blue LED on the
front panel of the humidifier).
5. Green LED flashing:
Waterreservoir being filled.
Green LED on:
Humidifier in flushing cycle.
7. SETTINGS
Configure control mode
Determines whether controller must operate based on capacity or in hygrostat mode.
Press and simultaneously for 10 seconds.
The upper screen shows the index 11.
The lower screen shows:
0 = Capacity control;.
1 = Hygrostat control. (factory setting)
Change the mode:
Press and simultaneously for 3 seconds.
The screen will now flash.
Press or to change.
Press and simultaneously for 3 seconds to confirm.
Press to return to the start screen.
Configure parameters
Determines how the controller reacts.
Press and simultaneously for 5 seconds.
The upper screen shows the index 1.
The lower screen shows the parameters:
1 = humidity offsett
2 = temperature offset
3 = minimum capacity
4 = maximum capacity
5 = bandwidth
Press to go to the required parameter.
1
2
3
5
4
