USER MANUAL
1
st
Issue 10/00 31
DMP025E
•
Press the key again to pass to the
second page
of
regulation parameters.
•
Press the key to place the cursor near the datum, which has
to be modified.
•
Press the key or until the required value is displayed.
•
Repeat the operation for all the data, which have to be edited.
•
Press the key .
The cursor will be placed at the top left of the display, over the “+”
symbol.
•
Press the key again to pass to the
third page
of regulation
parameters.
•
Press the key to place the cursor near the datum, which has
to be modified .
•
Press the key or until the required value is displayed.
•
Repeat the operation for all the data, which have to be edited.
•
Press the key .
The cursor will be placed at the top left of the display, over the “+”
symbol.
•
Press the key to return to the
first page.
•
Press the key . The related red signal will stop blinking .
F
Perform the above-mentioned operations for all the four groups
and all the single programmed controllers.
ENTER
Ã
ENTER
Ã
ENTER
Ã
PROG
ENTER
Ã
ENTER
Ã
