8 |
P a g e
Mounting and connectors
Figure 3: Mounting holes in the CO 13.01 wireless logger
Handling and Installation
The logger’s enclosure ensures a good protection against external hits from equipment, personnel and
other objects. The enclosure does not protect external objects such as antennas.
The enclosure is designed to withstand splashing water from any direction.
The CO 13.01 wireless logger can be mounted to a non-metal surface by using screws, bolts or straps as
shown in the figure above. Care must be taken that screws or bolts are chosen correctly for the surface
being mounted on. The logger weighs 105 g. Care must be taken that screws and bolts can handle the
weight for the given surface type. Wrong mounting and installation can cause the logger to fall from its
intended position and cause potential harm to nearby people. To lower risk of harm due to improper
installation, installation should be carried out by a qualified person.
Cleaning of logger should be done with neutral soap to prevent rubber sealing, buttons and LEDs from
failing. In case of a need to sanitize or sterilize use alcohol based compounds and wipe with a cloth.
Mounting Orientation
Recommended mounting orientation is shown in Figure 3. Mounting can affect range of wireless
communication.
Summary of Contents for CO 13.01
Page 5: ...5 P a g e ...