Control Techniques 0477-0008-01, User Manual

Page: 10 / 60

10
DeviceNet Module User Guide
www.controltechniques.com Issue 1
6. Parameter Object
The DeviceNet Module supports parameter objects through explicit messaging. Soft starter parameters can be uploaded (written) and
downloaded (read) using DeviceNet management software. When the DeviceNet Module is powered up, it automatically obtains
parameter information from the soft starter.
Table 6-1 Parameter object details
Detail Value (Hex) Comment
Class 0F Parameter object address
Instance 1 to xxx xxx = maximum soft starter parameter number
Attribute ID 01 Always 0x01
Get Service 0E Read single soft starter parameter value
Set Service 10 Write single soft starter parameter value
NOTE
Only available on Digistart IS soft starters. For parameter details, see the soft starter User Manual.
7. Specifications
Enclosure
Dimensions ........................................................................................................................... 35 mm (W) x 157 mm (H) x 90 mm (D)
Weight ..................................................................................................................................................................................... 250 g
Protection .................................................................................................................................................................................. IP20
Mounting
Spring-action plastic mounting clips (x 2)
Connections
Soft starter ......................................................................................................................................................... 6-way pin assembly
Network ................................................................................................... 5-way male and unpluggable female connector (supplied)
Maximum cable size ............................................................................................................................................................ 2.5 mm
2
Contacts ........................................................................................................................................................................... Gold flash
Settings
Node address (MAC ID)
Setting ............................................................................................................................................................. Rotary switches
Range ............................................................................................................................................. 0 to 63 (63, factory default)
Data rate
Setting ................................................................................................................................................................. Rotary switch
Options .......................................................................................................... 125 kB, 250 kB, 500 kB (125 kB, factory default)
Power
Consumption
steady state .................................................................................................................................................... 19 mA at 25 Vdc
......................................................................................................................................................................... 31 mA at 11 Vdc
in-rush (at 24 Vdc) .............................................................................................................................. 1.8 A maximum for 2 ms
Galvanically isolated
Certification
CE .......................................................................................................................................................................... IEC 60947-4-2
C

......................................................................................................................................................................... IEC 60947-4-2