Resetting the Logger
VFC400-USB User Guide
61
Resetting the Logger
You can reset a VFC400-USB back to its original
READY
state. Once reset, recording can
be
.
When performing this procedure all recordings and statistics stored in the logger
are irrevocably deleted and cannot be recovered. Please ensure your data has
been saved!
All configuration settings in the logger are retained.
For this process to work, the logger must be
STOPPED
.
Press and hold the
START
/CLEAR/STOP
button. The
READY
symbol will turn on.
When the
STOPPED
symbol turns off, release the
button within 2 seconds. The logger is now ready to
be started again.
If the button is released while
STOPPED
is still , or you wait until the
READY
symbol
disappears, the display shows
STOPPED
again, and the logger remains stopped. This
means, the data from the previous trip is still accessible.
The ability to reset a logger is enabled or disabled in the
configuring the VFC400-USB via Control Solutions VTMC.
